Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
CHAHNGES FOR rc55: ------- more memory leakage fixed, now very low memory value per time increasing -------- ------- improved BAD_DCW , now divided to three levels: SDCW,NDCW,CHKSM -------- ------- fixed bad_dcw debug window rolling -------- ------- possible to disable bad_dcw debug by parameter: -------- DISABLE_STATS BAD_DCW: YES ------- added possibility to set group for profile with parameters: -------- DCW GROUP_ACTIVE: YES/NO DCW GROUP: 1 (number) for C and N and cache lines: added on end: { group=1; } ------- possible to disable stats for cache peer by parameter: (for better performance) -------- DISABLE_STATS CACHE_PROFILE_HITS: YES ------- added some stats of parameters to Parameters page -------- ------- added Disabled button to Servers page and fix for disabled servers -------- ------- improved stability, ecm thread fix (hope - needed longer testing) --------
please for your own protection don't download the file from other forums (only those friendly forums), or if you need do it so, always check one of checksums as below: (to ensure of originality)
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Hi i hope you're fine after doing some tests with this new update rc55
BAD_DCW page i see log
"CHKS bad-dcw detected: caid: 0B01 provid: 000000 from source..........."
can you please add SID to know the affected channel + bug CACHE TIMEOUT in profile not read, multics get only default cache timeout value + your forget start time in cache to be changed from " Tue Mar 8 01:05:32 2022" to "just numbers date" without names Tue Mar.. + in debug page
098D CACHE TIMEOUT is only accepting 300 as value, lower than this it will be set to 800ms as the DEFAULT value for CPU and RAM, i see it good for the moment, but i will check it more and post my feedback
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
something is wrong with the installation mcs does not rise?
cannot be started
the same issue with me !
i can't start it neither
## EDIT --
after installing libgomp1, it started again
but it's strange, because rc54 was wotking fine with debian 11 and now with rc55 need to install this library which is also needed by rc54
it may be any number (for example 255 )
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
something is wrong with the installation mcs does not rise?
cannot be started
the same issue with me !
i can't start it neither
## EDIT --
after installing libgomp1, it started again
but it's strange, because rc54 was wotking fine with debian 11 and now with rc55 need to install this library which is also needed by rc54
this library is needed for all versions
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
Hi i hope you're fine after doing some tests with this new update rc55
BAD_DCW page i see log
"CHKS bad-dcw detected: caid: 0B01 provid: 000000 from source..........."
can you please add SID to know the affected channel + bug CACHE TIMEOUT in profile not read, multics get only default cache timeout value + your forget start time in cache to be changed from " Tue Mar 8 01:05:32 2022" to "just numbers date" without names Tue Mar.. + in debug page
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
098D CACHE TIMEOUT is only accepting 300 as value, lower than this it will be set to 800ms as the DEFAULT value for CPU and RAM, i see it good for the moment, but i will check it more and post my feedback
Regards.
you can set any value, but only with DEFAULT parameter, as seems there is some bug, not reading value CACHE TIMEOUT for profile, needed to be fixed
with profiling now are there values 50,150,300,800,1200
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
i don't know if it's possible to set more than one group for profiles or lines ?
like 1,2,3
is it possible or it's only one group allowed ?
there is possible to set only one value for profile
then when you need some another sids or from some reason to divide profile, you can set different C, N , Cache lines with those group
but it's not there done of using more groups for profile or users, only one group
it's because on multics it would be really slowering the performance
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
Cacheex replies is not working!!! Whats is the problem?
for me it's working normal as before
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
great razor, i got your point and it's totally wonderful to think about the performance, which is the most important thing i have another question, and i would like to know, if it's possible to divide a package by two profiles let's says for example 1810 , one profile for some sids and cache enabled, and other profile with football sids and cache is not enbaled ( to avoid receiving CWs from cache peers ) is this possible and won't confuse multics when mapping the requests to the profiles ? what's the best config to use on each profile, to not confuse multics when requesting for sids wich is denied on the other profile ? it will not make multics think that this sid is not possible to decode requests for it and then send DCW faild !!
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
great razor, i got your point and it's totally wonderful to think about the performance, which is the most important thing i have another question, and i would like to know, if it's possible to divide a package by two profiles let's says for example 1810 , one profile for some sids and cache enabled, and other profile with football sids and cache is not enbaled ( to avoid receiving CWs from cache peers ) is this possible and won't confuse multics when mapping the requests to the profiles ? what's the best config to use on each profile, to not confuse multics when requesting for sids wich is denied on the other profile ? it will not make multics think that this sid is not possible to decode requests for it and then send DCW faild !!
I think it should be possible to do with two profiles and SID lists there
but never try it
test it and let us know
if there is some problem with this, we can then make some solution for
if I will have time, will test it also
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...
what i've noticed is that you did great work for CPU / RAM usages, which is great with thus version for 4 cores, i've had about 130% CPU usage, and 1.2 <> 1.5 load average for now, i have like 40% CPU usage, and 0.5 <> 0.2 load average
i love what you doing, and i don't know if there's anyone can handle this issue as you did in this version
because i've tried many versions, but r100 is something different
please, consider to added paypal account or patreon, so we can send some gifts and anyone can pay for the paid version, don't hesitate doing it, to support the team because they are doing great work to keep up multics running and updated !
Posts - 295
Likes - 482
Joined - January 1970
Forum Group: - Administrator Forum Group: - Global Moderator Forum Group: - Tester Multics 1 - Not Public r100
what i've noticed is that you did great work for CPU / RAM usages, which is great with thus version for 4 cores, i've had about 130% CPU usage, and 1.2 <> 1.5 load average for now, i have like 40% CPU usage, and 0.5 <> 0.2 load average
i love what you doing, and i don't know if there's anyone can handle this issue as you did in this version
because i've tried many versions, but r100 is something different
please, consider to added paypal account or patreon, so we can send some gifts and anyone can pay for the paid version, don't hesitate doing it, to support the team because they are doing great work to keep up multics running and updated !
Thank you for all
seems those high CPU values was caused by missing CS378X port in config, than who was not using CS378X and port in config than, there was issue one core-thread still overloading to 100% (one people here reported it as CS378X issue, I could not find reason long time)
I can't to fix it longer time, as it was so coded, now seems it should be ok, but hope there will not be problem with cs378x lines (one friend reported me not connecting cs378x, but he has two HW, on one not problem and on second connections problems with the same configs, strange)
on my side I tested configuration now as it's coded with this fix, and seems ok
to lower cpu and memory also helped testing with valgrind and memory leakage fixes
There are many different races, religions and ideas and everyone is entitled to their own views, but this is the right momentum that moves humanity forward, beyond better destiny and freedom, so let others live their own dream, which makes up our better common world...