MultiCS r100-rc52 NotPublic - BrokenArrow - MEGAcACHE - VPsM
Feb 1, 2022 18:24:03 GMT
SCS81, inicio, and 9 more like this
Post by razor123 on Feb 1, 2022 18:24:03 GMT
release date: 1.2.2022
MultiCS r100-rc52 NotPublic - BrokenArrow - MEGAcACHE - VPsManager - Version: xDecrypt - 9e427f2b2612a0d467a88ddc3e8ca77408380178
CHAHNGES FOR rc52:
------- changed compilation optimalizations from Server to VPS --------
------- fixed some memory leaks causing higher memory usage and cpu load on VPS--------
------- mgcamd connections stabilization fix --------
------- cccam connections stabilization fix --------
------- identified issue with overload, causing it missing default parameters in main config --------
------- this issue depends on usage of cs378x mode cacheex when it's raised above value of 2 --------
------- for higher values as 2 starting from rc51 (where is allowed maxhop 10) --------
------- it's causing big load on cacheex, in rc52 should be fixed, if maxhop parameter is missing --------
------- in config, or it's in a part of configs/includes where is not taken right value --------
------- it's set to 2 code as default value in any cases, except of right set values from 3 to 10 --------
------- many changes of colorization and columns width and texts for better design --------
------- attached bicho1890 style as default style now (thx) --------
------- for more styles there was added parameter for color change for connected columns --------
------- needed to add this parameter to config: --------
COLORS TEXT CONNECTED: white
------- bog clean-up of debug log messages -> moved to state when not active turbomode --------
------- added VPS memory manager for more better memory management --------
------- raised usage of RAM memory for better performance --------
------- always keep parameters above and parameters for iptables and default parameters --------
------- in main config, main config should contains from above to lower : HTTP values --------
------- CACHE values; include files; main parameters; values for buttons: iptables; --------
------- for Multics Profiles; VPS profiles; Defauls parameters; pairing key --------
------- otherwise you may get unstable behaviour --------
------- lower options are available only for not public versions:
------- added Multics Profiling - on Parameters page, now you can choose profile there --------
------- by buttons, use only buttons - don't touch values in config !!! --------
------- recommended profile: default --------
------- added VPS manager for VPS profiling and optimalization --------
------- possible set by buttons on Parameters page, use only buttons - don't touch values in config !!! --------
------- it's recommended Virtual G profile of VPS manager, --------
------- with this profile you should have to --------
------- better performance - lower CPU load, this manager optimize also Oscam binaries --------
------- then it's useful for high cpu load Oscams (cs378x) to save some cpu load --------
for using of this, put to config these parameters:
# don't touch - internal- use only buttons !!!
MULTICS_PROFILES POWERSAVE: NO
MULTICS_PROFILES MINIMAL: NO
MULTICS_PROFILES DEFAULT: YES
MULTICS_PROFILES PERFORMANCE: NO
MULTICS_PROFILES MAX: NO
# don't touch - internal- use only buttons !!!
VPS_PROFILES POWERSAVE: NO
VPS_PROFILES DEFAULT: NO
VPS_PROFILES BALANCED: NO
VPS_PROFILES VIRT-G: YES
VPS_PROFILES KVM: NO
------- before installing this version, there is needed install of dependency packages: --------
------- apt-get install psmisc --------
------- apt-get install tuned --------
------- if you don't want to install/use r100 Memory Manager use option -R set to 1 as start parameter --------
------- example - start script: /usr/local/bin/multicsr100rc52 -R 1 -b -C /usr/local/etc/multics.cfg --------
------- if you don't want to install/use r100 VPS Manager use option -K set to 1 as start parameter --------
------- example - start script: /usr/local/bin/multicsr100rc52 -K 1 -b -C /usr/local/etc/multics.cfg --------
------- implemented all needed things for fix of 1810 (football matches) - more info contact scs81 --------
------- implemented improvements for caid 1890 , 1891 and 1892 projects --------
------- implemented security for 1890,1891 and 1892 - now debug possible only by parameter in --------
------- config: DEBUG_CODE 1890: example and DEBUG_CODE 1891: example --------
------- for more information contact scs81 (thx)--------
------- added management for these caids to not be send by cache_reply or cache_forward to --------
------- others versions of multics's, only to r100 not public versions --------
------- with start from console with set parameter DEBUG_CODE there is showed --------
------- communication among servers for these caids only --------
------- thanks to : scs81 and bicho1980 --------
------- changed compilation optimalizations from Server to VPS --------
------- fixed some memory leaks causing higher memory usage and cpu load on VPS--------
------- mgcamd connections stabilization fix --------
------- cccam connections stabilization fix --------
------- identified issue with overload, causing it missing default parameters in main config --------
------- this issue depends on usage of cs378x mode cacheex when it's raised above value of 2 --------
------- for higher values as 2 starting from rc51 (where is allowed maxhop 10) --------
------- it's causing big load on cacheex, in rc52 should be fixed, if maxhop parameter is missing --------
------- in config, or it's in a part of configs/includes where is not taken right value --------
------- it's set to 2 code as default value in any cases, except of right set values from 3 to 10 --------
------- many changes of colorization and columns width and texts for better design --------
------- attached bicho1890 style as default style now (thx) --------
------- for more styles there was added parameter for color change for connected columns --------
------- needed to add this parameter to config: --------
COLORS TEXT CONNECTED: white
------- bog clean-up of debug log messages -> moved to state when not active turbomode --------
------- added VPS memory manager for more better memory management --------
------- raised usage of RAM memory for better performance --------
------- always keep parameters above and parameters for iptables and default parameters --------
------- in main config, main config should contains from above to lower : HTTP values --------
------- CACHE values; include files; main parameters; values for buttons: iptables; --------
------- for Multics Profiles; VPS profiles; Defauls parameters; pairing key --------
------- otherwise you may get unstable behaviour --------
------- lower options are available only for not public versions:
------- added Multics Profiling - on Parameters page, now you can choose profile there --------
------- by buttons, use only buttons - don't touch values in config !!! --------
------- recommended profile: default --------
------- added VPS manager for VPS profiling and optimalization --------
------- possible set by buttons on Parameters page, use only buttons - don't touch values in config !!! --------
------- it's recommended Virtual G profile of VPS manager, --------
------- with this profile you should have to --------
------- better performance - lower CPU load, this manager optimize also Oscam binaries --------
------- then it's useful for high cpu load Oscams (cs378x) to save some cpu load --------
for using of this, put to config these parameters:
# don't touch - internal- use only buttons !!!
MULTICS_PROFILES POWERSAVE: NO
MULTICS_PROFILES MINIMAL: NO
MULTICS_PROFILES DEFAULT: YES
MULTICS_PROFILES PERFORMANCE: NO
MULTICS_PROFILES MAX: NO
# don't touch - internal- use only buttons !!!
VPS_PROFILES POWERSAVE: NO
VPS_PROFILES DEFAULT: NO
VPS_PROFILES BALANCED: NO
VPS_PROFILES VIRT-G: YES
VPS_PROFILES KVM: NO
------- before installing this version, there is needed install of dependency packages: --------
------- apt-get install psmisc --------
------- apt-get install tuned --------
------- if you don't want to install/use r100 Memory Manager use option -R set to 1 as start parameter --------
------- example - start script: /usr/local/bin/multicsr100rc52 -R 1 -b -C /usr/local/etc/multics.cfg --------
------- if you don't want to install/use r100 VPS Manager use option -K set to 1 as start parameter --------
------- example - start script: /usr/local/bin/multicsr100rc52 -K 1 -b -C /usr/local/etc/multics.cfg --------
------- implemented all needed things for fix of 1810 (football matches) - more info contact scs81 --------
------- implemented improvements for caid 1890 , 1891 and 1892 projects --------
------- implemented security for 1890,1891 and 1892 - now debug possible only by parameter in --------
------- config: DEBUG_CODE 1890: example and DEBUG_CODE 1891: example --------
------- for more information contact scs81 (thx)--------
------- added management for these caids to not be send by cache_reply or cache_forward to --------
------- others versions of multics's, only to r100 not public versions --------
------- with start from console with set parameter DEBUG_CODE there is showed --------
------- communication among servers for these caids only --------
------- thanks to : scs81 and bicho1980 --------
please for your own protection don't download the file from other forums (only those friendly forums), or if you need do it so, always check one of checksums as below: (to ensure of originality)
md5: DDA90009C190BC617A60CB5DC1BFCD2F
SHA1: 5818C409EA6BCCF1E3364C327A4249B5DD43C0D7
SHA256: 9F45BCF9627C78B9673377EB606D0368D8C63A39D9797B5060FB6E38A97E9FBC
SHA384: 79776132423FE8DA23A823CA7DB1313B351CC9209FE8C3AEC5249E9B9FE1AA25C1A6F93C23F7D23FAF780BCF4C266782
SHA512: 5D7912CFF59D8934E294BC5DDE99BCD16A495F885F58E0247B1C98CAECB75D0545AC8C692E05A7BFCEEC43D7B78DE664ADC2BB8772C55A5066B4556ACFC3FD76
md5: DDA90009C190BC617A60CB5DC1BFCD2F
SHA1: 5818C409EA6BCCF1E3364C327A4249B5DD43C0D7
SHA256: 9F45BCF9627C78B9673377EB606D0368D8C63A39D9797B5060FB6E38A97E9FBC
SHA384: 79776132423FE8DA23A823CA7DB1313B351CC9209FE8C3AEC5249E9B9FE1AA25C1A6F93C23F7D23FAF780BCF4C266782
SHA512: 5D7912CFF59D8934E294BC5DDE99BCD16A495F885F58E0247B1C98CAECB75D0545AC8C692E05A7BFCEEC43D7B78DE664ADC2BB8772C55A5066B4556ACFC3FD76
download:
Multics-r100rc52-NotPublic-BrokenArrow_x64.zip (564.47 KB)